All applications for employment by Lorco must be submitted to the Lorco Personnel Department for consideration and must meet Company criteria and qualifications for employment.  Applicants for employment or promises of employment from outside personnel agencies not authorized by the Company shall not be accepted by or binding upon Lorco.

CDL Class B driver Elkton, MD

Pre-Employment Qualifications:  Obtain TWIC Card & pass Pre-Employment Physical & DOT Drug Test.  For all potential employees being considered for a “driving positions” they must pass the DOT Drug Test and have the approval of our Vehicle Insurance Carrier  {XL Insurance} with a “clear” MVR (Motor Vehicle Record).  They must also pass a road test monitored by an approved Lorco licensed driver.

The Parts Washer Driver Position has multiply responsibilities that include the following: Drive a box truck delivering drums of fluid (i.e. antifreeze, windshield washer, parts washer solvent), parts washer units/parts and absorbent pads.  The position also requires the individual to collect drums of used oil filters, waste parts washer solvent, and recollect used empty drums.  This individual must also be able to manage and accurately maintain the invoices and associated paper work requirements.  The physical characteristics of this job require the following:

• The ability to work a minimum 8 hour day, (5 days a week) with the time divided between driving and stopping at customers’ sites to service their needs and cold callings.
• The strength to repeatedly climb into & out of both the truck and the truck’s box.
• Absolutely, must have a “Clear” Motor Vehicle Record (MVR).
• Perform a Pre and Post – Trip Inspection on the truck you were provided.
• The strength to transport with the assist of a drum dolly (manual hand truck)

55 gallon drums of fluid or used oil filters that weigh between 500-700 lbs.

• Properly clean up chemical spills when necessary
• The ability to bend and twist during the course of delivering product.
• The ability to lift up to 50 lbs.
• The ability to work outside and manage the weather accustomed to the north-east
• Must be able to effectively communicate (verbal & written) & maintain a professional business relationship with all customers.
• Proficient in driving both a manual and automatic transmission truck
• Have a good sense of direction and the ability to interpret a map, minimizing the possibility of getting lost or traveling on restricted road ways.

Off on Nights & weekends!! We offer benefits!

Must have Hazmat and Tanker endorsement
2+ years of experience

Parts Washer Driver

Pre-Employment Qualifications:  Obtain TWIC Card & pass Pre-Employment Physical & DOT Drug Test.  For all potential employees being considered for a “driving positions” they must pass the DOT Drug Test and have the approval of our Vehicle Insurance Carrier {XL Insurance} with a “clear” MVR (Motor Vehicle Record).  They must also pass a road test monitored by an approved Lorco licensed driver.

The Parts Washer Driver Position has multiply responsibilities that include the following: Drive a box truck delivering drums of fluid (i.e. antifreeze, windshield washer, and parts washer solvent), parts washer units/parts and absorbent pads.  The position also requires the individual to collect drums of used oil filters, waste parts washer solvent, and recollect used empty drums.  This individual must also be able to manage and accurately maintain the invoices and associated paper work requirements.  The physical characteristics of this job require the following:

• The ability to work a minimum 8 hour day, (5 days a week) with the time divided between driving and stopping at customers’ sites to service their needs and cold callings.
• The strength to repeatedly climb into & out of both the truck and the truck’s box.
• Absolutely, must have a “Clear” Motor Vehicle Record (MVR).
• Perform a Pre and Post – Trip Inspection on the truck you were provided.
• The strength to transport with the assist of a drum dolly (manual hand truck)

55 gallon drums of fluid or used oil filters that weigh between 500-700 lbs.

• Properly clean up chemical spills when necessary
• The ability to bend and twist during the course of delivering product.
• The ability to lift up to 50 lbs.
• The ability to work outside and manage the weather accustomed to the north-east
• Must be able to effectively communicate (verbal & written) & maintain a professional business relationship with all customers.
• Proficient in driving both a manual and automatic transmission truck
• Have a good sense of direction and the ability to interpret a map, minimizing the possibility of getting lost or traveling on restricted road ways.

The job of a Lorco Petroleum Services Parts Washer Driver requires that they wear the following Personal Protective Equipment, (P.P.E.):

• Company uniform, pants, shirt, jacket
• Chemical resistant apron
• Gloves – Chemical resistant gloves (i.e. nitrile or rubber)
• Gloves – Cut resistant gloves (i.e. kevlar or ata)
• Hard Hat (when required)
• Eye Protection, usually safety glasses, possibly goggles a/o face shield
• Steel toed boots, oil resistant & black
• Bright high visibility illuminated vest or shirt
• Inclement weather gear rain jacket & rubber boots (when necessary)

Tractor Trailer Driver

Pre-Employment Qualifications:  Obtain TWIC Card & pass Pre-Employment Physical & DOT Drug Test.  Drivers must obtain a DOT medical card.  Drivers must hold a {CDL} Commercial Drivers License – Class A with tanker & hazmat endorsements. Drivers must also have a “clear” MVR (Motor Vehicle Record) and obtain the approval of our Vehicle Insurance Carrier  {XL Insurance}.  Candidates must also pass a road test, including a driver’s pre-trip inspection and the ability to couple and unhook a trailer monitored by an approved Lorco licensed driver.

A Lorco Tractor Trailer Driver has multiply responsibilities that go beyond just driving either a tanker or box trailer. Some of the tasks beyond the driving include loading and unloading product (Fluids – i.e. waste oil, antifreeze, windshield washer, oily water, etc.) in and out of the tanker trailers.  Also, assisting in the loading and unloading of box trailers (mostly drums – empties, or full with used oil filters, solids or waste parts washer solvent).  This individual must also perform daily pre & post trip inspections.  Also, be able to accurately maintain the invoices and associated paper work, including all DOT required documents i.e. Driver’s Daily Log.  The physical characteristics of this job require the following:

• The ability to work 8-14 hours a day, (usually 5 days a week) with the time divided between driving and stopping at customers’ sites.  Also the ability to be flexible with working hours.
• Able to work early morning starts when necessary i.e.: 3:30 am, 4:30 am, etc.
• The strength & ability to repeatedly climb in & out of the truck’s cab, & on top of tanker trailers & into the back of box trailers. All drivers must be able to: climb, squat, crouch, bend, push & pull.
• The strength to transport with the assist of a drum dolly (manual hand truck)

55 gallon drums of fluid, solids or used oil filters that weigh between 500-900 lbs.

• Properly clean up product spills when necessary.
• The ability to bend and twist during the course of a day & to lift up to 50 lbs.
• The ability to work outside, with north/east weather & drive in all four seasons
• Must be able to communicate (verbal & written) & maintain a professional business relationship with all customers, managers, co-workers & any government or law enforcement agencies.
• Have a good sense of direction and the ability to interpret a map, minimizing the possibility of getting lost, or traveling on restricted roadways.
• The ability to grasp & understand the safety requirements of specific customers (Exxon, Shell, Kinder Morgan, etc. and achieve competency in OSHA 40 hr., LPS, API, training etc.
• Follow Facial Hair Policy and have the ability to wear a respirator, if required.

The job of a Lorco Petroleum Services Tractor Trailer Driver requires that they wear the following Personal Protective Equipment, (P.P.E.):

• Company uniform, pants, shirt, jacket
• Flame retardant (FR) coveralls
• Gloves – Chemical resistant gloves (i.e. nitrile or rubber) or Cut resistant gloves (i.e. kevlar or ata)
• Hard Hat & Hearing Protection (plugs or muffs)
• Eye Protection, usually safety glasses, possibly goggles a/o face shield
• Steel toed boots, oil resistant & black
• Bright high visibility illuminated vest
• Inclement weather gear rain jacket & rubber boots (when necessary)